Coralife Pure Flo II 50 GPD | |
| |
| $ 129.99
|
| |
50 GPD TFC membrane 1 micron filter cartridge Carbon block filter cartridge Ideal Source Water Conditions: Chlorinated or non-chlorinated water supplies Water pressure - 60 PSI Water temperature range: 69 - 78 degrees Fahrenheit Replacement Filters: 76010 - 1 micron cartridge replace every six months minimum 76012 - Carbon block replace every six months or 2,500 gallons 76021 - 50 gallon-per-day TFC replacement membrane replace every 2 to 3 years NOTE: Change times are varied depending water conditions. Stated times are an average. Membrane Specifications: Length: 11 3/4" Diameter: 1 1/2" Body Length: 10" Specifications: Length: 14" Width: 5 7/8" Height: 15" Dry weight: 7 1/2 lbs. 3 gallons waste water to 1 gallon production water Maximum Total Dissolved Solids (TDS) in source water less than 250 ppm Membrane type: TFC (Thin Film Composite) Rated Gallons Per Day: 50 Inlet for source water: 3/4" garden hose connection with faucet adaptor and 3/8" pressure tubing Tubing type: 1/4" pressure tubing Coralife Pure-Flo II Thin Film Composite (TFC) Reverse Osmosis Water Purification Systems generate purified water for aquarium use. The units remove hardness, heavy metals, toxins and many other tap water impurities. The Coralife Pure-Flo II units include clear filter canisters, cartridges and faucet attachments. The Pure-Flo II units are economical, convenient and wall-mountable. The Coralife Pure-Flo II units are usable with chlorinated and well-water sources. Great for Freshwater or Saltwater Aquariums.
Instructions:
**NOTE: DISCARD FIRST 10 GALLONS OF WATER PRODUCED**
Ideal water conditions:
Water pressure: 60 PSI
Water temperature: 69-78 degrees F.
Membrane installation:
Unscrew nut on elbow fitting and remove water line.
Unscrew membrane housing cap.
Insert membrane into membrane housing.
Replace membrane housing cap.
Canister removal:
Slide canister wrench over cartridge canister. Turn wrench to loosen canister.
Remove cartridge canister.
Flush carbon block cartridge with tap water for a minimum of 5 minutes before
use.
Plumbing hook-up:
Attach inlet for source water to chlorinated or well water supply (yellow tube).
NOTE: to attach directly to your faucet, attach the faucet adaptor to the inlet
for source water.
Route wastewater outlet line to drain (white tube). Z
Route purified water outlet line to storage container (blue tube).
Make sure all plumbing fittings and membrane housing cap are screwed down tight.
Plug in the pump.
Prefilters should be replaced every 6 months or 3000 gallons, membrane should be
changed once a year.
Specifications:
3 gallons waste water to 1 gallon production water
Maximum Total Dissolved Solids (TDS) in source water less than 250 ppm
Membrane type: TFC (Thin Film Composite)
Rated Gallons Per Day: 50
Inlet for source water: 3/4" garden hose connection with faucet adaptor and 3/8"
pressure tubing
Tubing type: 1/4" pressure tubing
Size:
14.25" x 6.5" x 15.5"
Warranty:
Unit has a 1 year warranty against defects in material and workmanship.
|
| | |
|
| Weight: | 15.00lb |
|
| Manufactured by: | Coralife |
|
| Payment Methods |
| Visa, Mastercard, Discover, American Express, Money Order, Cashier Check |
|
